Fox Sliders
Fox Sliders, Khaki/Camo colour sliders.
Fox Sliders, Khaki/Camo colour sliders.
After the success of the green OG heads Geert made for us, we thought a dinky little lightweight head would be a great addition to the range...
Old skool fluoro bobbins, made by Belgian legend and big carp angler Geert Ooms, in a classic 90's style and a nod to the original Solar fluoro bobbins and indicators that we grew up using.
We still get sent shots of you wearing our original 2014 hoods, ten years on, they've been one of our most loved garments since day 1 and have been worn 'til the bitter end. We only ever did a couple of runs of these and we have been asked to bring them back time and time again.
This handy Fox wind shield features a lightweight aluminium construction and is made up of 7 hinged panels allowing you to provide your stove with essential protection from the wind. By shielding the stove from the wind, your stove will be more efficient and will use less fuel.
The Delkim NiteLite Pro Illuminating Hanger evolved from the original Delkim NiteLite and took three years of intensive development and field testing to perfect. The challenge was to find a way to make a version of the original Delkim NiteLite with the advantages of a cable assembly that performed as a lightweight chain...
Spend £350.00 or more to qualify for 0% Interest Finance.
Only available to UK residents over 18, subject to terms and conditions.
More information
Type your email address here to be notified when this product is available.
The Delkim NiteLite Pro Illuminating Hanger evolved from the original Delkim NiteLite and took three years of intensive development and field testing to perfect. The challenge was to find a way to make a version of the original Delkim NiteLite with the advantages of a cable assembly that performed as a lightweight chain. Not as easy as it sounds. After much research, particularly into the medical endoscope field (ouch!!), nothing suitable was found so we had to invent something new, the CatFlex™ cable assembly. This gives good tensile strength and allows the fine wires needed to connect to the Delkim Plus range bite alarm to be protected and encased in a flexible black stainless steel coil. The complete assembly hangs in a perfect Catenary* curve.
Also included in the development of the Delkim NiteLite Pro Illuminating Hanger was a completely new self-adjusting integral magnetic ball clip which makes the old style adjustable types redundant. The NiteLite Pro is a complete illuminating hanger, line clip and bite alarm attachment all in one, that performs just like a chain. It replicates all the Delkim Plus range of alarms’ LED functions, flashing, latching, brightness adjustment and Night Marking WITHOUT ADDITIONAL BATTERIES. It is strong, hangs perfectly, is self-adjusting and non-twist.
FEATURES
- PATENTED INTEGRAL MAGNETIC BALL CLIP - Self-adjusting, non-twist and non-corroding
- SMOOTH STRIKE RELEASE - No snatching or possible over tightening
- THREADED TO TAKE D-STAK ADD ON WEIGHTS - Not included
- PATENTED BLACK CatFlex™ CABLE ASSEMBLY* - Hangs and flexes like a chain
- CLEAR HANGER WITH INTEGRAL LED - Flashing, latching and Night Marking
- NO BATTERIES REQUIRED - Powered off Delkim Plus range of bite alarms
- AVAILABLE IN SIX COLOURS - Available in Red, White, Blue, Green, Yellow or Purple
- DEDICATED QUICK RELEASE - For Delkim DuoCarb Pivoting Hanger Support
- CABLE LENGTH - 278mm
NOTE - The Delkim NiteLite Pro Illuminating Hanger can only be used with the Delkim Plus range of bite alarms and is recommended for use with the corresponding alarm colour.
*Catenary – “The curve a hanging flexible wire or chain assumes when supported at its ends and acted upon by a uniform gravitational force”, hence CatFlex™
Red/Yellow/Green/Blue/Purple & White £25.00
Spend £350.00 or more to qualify for 0% Interest Finance.
Only available to UK residents over 18, subject to terms and conditions.
More information
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.