Free Spirit Hi S Carp Feeder Rod Full Cork
Free Spirit have used their Ultra Low Resin Carbon in 40t & 46t aerospace-grade with 1k woven butt section for the Carp Feeders to ensure the blanks are extremely light yet strong. This same material has been used to produce hollow carbon push in quiver tips which eliminate any ‘dead’ spot in the action caused by the transition from the usual solid carbon or glass tip to the hollow section of the rod. This also allows more feel through the blank and into the hand. The rod will bend progressively from the end of the tip through the joint with a subtle build-up of power giving control when needed but still allowing light lines and hook links to be used.
The blank has the Free Spirit ‘Perdurable’ finish meaning there is no paint or lacquer just the carbon itself and will look good through many years of service. Free Spirit have used the same Fuji reel seat on the feeders as a feature on the Waggler range to allow more feel through the blank from the hollow tip and the rest of the fittings complement this perfectly. Anti-frap guides are fitted since the design is less prone to the reel line or shock leader catching the butt guide or any intermediate and causing a crack-off. Handle lengths have been set to allow easy change of direction when playing hard fighting carp.
The Free Spirit Carp Feeders are available in lengths from 9’ for the small commercials, through 10’ and 11’ and a heavier 12’ ‘S’ (stepped-up) version for use on the larger reservoirs.
The above can have custom-built handles to suit. Blank and Rod weights can vary slightly – these are for guidelines only.
MODEL RATINGS
Free Spirit Hi-‘S’ Carp Feeder 9’
Line Rating: 0.16 - 0.28 / 3lb – 10lb
Casting Weight: 10g to 40g
Free Spirit Hi-‘S’ Carp Feeder 10’
Line Rating: 0.16 - 0.28 / 3lb – 10lb
Casting Weight: 10g to 40g
Free Spirit Hi-‘S’ Carp Feeder 11’
Line Rating: 0.16 - 0.28 / 3lb – 10lb
Casting Weight: 10g to 45g
Free Spirit Hi-‘S’ Carp Feeder S 12’
Line Rating: 0.16 - 0.30 / 3lb – 12lb
Casting Weight: 20g to 50g
TECHNICAL DATA
BLANK: Hi-S Low Resin 40t Carbon with 1k Woven Butt
GUIDES: Kigan Z Type and ZL Type on Quiver Tip
REEL SEAT: Fuji TVSM16/B
FITTINGS: Carbon and Aluminium
BUTT GRIP : Full Cork
This shows which tips the rods come supplied with.
Hi-‘S’ Carp Feeder 9’ - Cork Tips Supplied: 2oz, 2½oz
Hi-‘S’ Carp Feeder 10’ - Cork Tips Supplied: 2oz, 2½oz
Hi-‘S’ Carp Feeder 11’ - Cork Tips Supplied: 2oz, 2½oz
Hi-‘S’ Carp Feeder S12’ - Cork Tips Supplied: 3oz, 3½oz
All tips supplied are Hollow Carbon
